Buscar
Mostrando ítems 1-8 de 8
Influence of connection type and platform diameter on titanium dental implants fatigue: non-axial loading cyclic test analysis
(MDPI, 2020)
Two-pieces dental implants must provide stability of the implant-abutment-interface. The connection type and platform diameter could influence the biomechanical resistance and stress distribution. This ...
Antibacterial properties of hLf1-11 peptide onto titanium surfaces: a comparison study between silanization and surface initiated polymerization
(ACS Publications, 2015)
Dental implant failure can be associated with infections that develop into peri-implantitis. In order to reduce biofilm formation, several strategies focusing on the use of antimicrobial peptides (AMPs) ...
Determination of fluid leakages in the different screw-retained implant-abutment connections in a mechanical artificial mouth
(Springer, 2015-07-15)
This study shows the potential risk of microfiltration between two different types of implant-abutment connections screwed at 45 Ncm: external and internal. For the first time the use of a mechanical ...
Fracture and fatigue of titanium narrow dental implants: new trends in order to improve the mechanical response
(MDPI, 2019-11-12)
Sixty-four fractured commercially pure titanium (cp-Ti) narrow dental implants (NDIs) with similar macrogeometry and connection designs were studied after different implantation times in humans in order ...
Silver deposition on titanium surface by electrochemical anodizing process reduces bacterial adhesion of Streptococcus sanguinis and Lactobacillus salivarius
(John Wiley & Sons, 2015)
Objectives: The aim of this study was to determine the antibacterial properties of silver-doped titanium surfaces prepared with a novel electrochemical anodizing process. Material and methods: Titanium ...
Two different strategies to enhance osseointegration in porous titanium: inorganic thermo-chemical treatment versus organic coating by peptide adsorption
(MDPI, 2018)
In this study, highly-interconnected porous titanium implants were produced by powder sintering with different porous diameters and open interconnectivity. The actual foams were produced using high cost ...
Antibacterial properties of triethoxysilylpropyl succinic anhydride silane (TESPSA) on titanium dental implants
(MDPI, 2020)
Infections related to dental implants are a common complication that can ultimately lead to implant failure, and thereby carries significant health and economic costs. In order to ward off these infections, ...
Polyethylene glycol pulsed electrodeposition for the development of antifouling coatings on titanium
(MDPI, 2020)
Titanium dental implants are widely used for the replacement of damaged teeth. However, bacterial infections at the interface between soft tissues and the implant can impair the functionality of the ...