Mechanical characterisation and biomechanical and biological behaviours of Ti-Zr binary-alloy dental implants
Autor/a
Pérez-Pevida, Esteban
Jiménez-Garrudo, Antonio
Gil Mur, Francisco Javier
Manero, José María
Punset fuste, Miquel
Chávarri Prado, David
Diéguez, Markel
Monticelli, Francesca
Data de publicació
2017ISSN
2314-6133
Resum
The objective of the study is to characterise the mechanical properties of Ti-15Zr binary alloy dental implants and to describe their biomechanical behaviour as well as their osseointegration capacity compared with the conventional Ti-6Al-4V (TAV) alloy implants. The mechanical properties of Ti-15Zr binary alloy were characterised using Roxolid© implants (Straumann, Basel, Switzerland) via ultrasound. Their biomechanical behaviour was described via finite element analysis. Their osseointegration capacity was compared via an in vivo study performed on 12 adult rabbits. Young’s modulus of the Roxolid© implant was around 103 GPa, and the Poisson coefficient was around 0.33. There were no significant differences in terms of Von Mises stress values at the implant and bone level between both alloys. Regarding deformation, the highest value was observed for Ti-15Zr implant, and the lowest value was observed for the cortical bone surrounding TAV implant, with no deformation differences at the bone level between both alloys. Histological analysis of the implants inserted in rabbits demonstrated higher BIC percentage for Ti-15Zr implants at 3 and 6 weeks. Ti-15Zr alloy showed elastic properties and biomechanical behaviours similar to TAV alloy, although Ti-15Zr implant had a greater BIC percentage after 3 and 6 weeks of osseointegration.
Tipus de document
Article
Versió del document
Versió acceptada
Llengua
Anglès
Matèries (CDU)
616.3 - Patologia de l'aparell digestiu. Odontologia
Paraules clau
Implants dentals
Ossos facials
Pròtesis dentals
Odontologia
Ossos -- Regeneració
Implantes dentales
Huesos faciales
Prótesis dentales
Odontología
Huesos -- Regeneración
Dental implants
Facial bones
Dental prosthesis
Odontology
Bones -- Regeneration
Pàgines
11
Publicat per
Hindawi
Col·lecció
2017;
Publicat a
BioMed Research International
Citació
Brizuela-Velasco, Aritza; Pérez-Pevida, Esteban; Jiménez-Garrudo, Antonio. Mechanical characterisation and biomechanical and biological behaviours of Ti-Zr binary-alloy dental implants. BioMed Research International, 2017, 2017, p. 1-11. Disponible en: <https://www.hindawi.com/journals/bmri/2017/2785863/>. Fecha de acceso: 29 may. 2020. DOI: 10.1155/2017/2785863.
Aquest element apareix en la col·lecció o col·leccions següent(s)
- Odontologia [228]
Drets
© 2017 Aritza Brizuela-Velasco et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Excepte que s'indiqui una altra cosa, la llicència de l'ítem es descriu com https://creativecommons.org/licenses/by/4.0/