Cerca
Ara mostrant els elements 1-10 de 15
Two different strategies to enhance osseointegration in porous titanium: inorganic thermo-chemical treatment versus organic coating by peptide adsorption
(MDPI, 2018)
In this study, highly-interconnected porous titanium implants were produced by powder sintering with different porous diameters and open interconnectivity. The actual foams were produced using high cost ...
Antibacterial properties of triethoxysilylpropyl succinic anhydride silane (TESPSA) on titanium dental implants
(MDPI, 2020)
Infections related to dental implants are a common complication that can ultimately lead to implant failure, and thereby carries significant health and economic costs. In order to ward off these infections, ...
Citric acid passivation of titanium dental implants for minimizing bacterial colonization impact
(MDPI, 2021)
Surface topography and physical-chemical properties usually play a key-role in both osseointegration improvement and bacterial colonization reduction over the surface of dental implants. The aim of this ...
Evaluation of titanium dental implants after early failure of osseointegration by means of X-ray photoelectron spectoscopy, electron microscopy and histological studies
(Scientific Research Publishing, 2010-11)
In this work, we analysed 56 clinically failed and retrieved implants by means of scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS) and histological studies. The surface ...
Antibacterial properties of hLf1-11 peptide onto titanium surfaces: a comparison study between silanization and surface initiated polymerization
(ACS Publications, 2015)
Dental implant failure can be associated with infections that develop into peri-implantitis. In order to reduce biofilm formation, several strategies focusing on the use of antimicrobial peptides (AMPs) ...
Antifouling coatings for dental implants: PEG-like coatings on titanium by plasma polymerization
(American Vacuum Society, 2015-06)
Titanium dental implants are commonly used for the replacement of lost teeth, but they present a considerable number of failures due to the infection on surrounding tissues. The aim of this paper is the ...
Relevant aspects of titanium and zirconia dental implants for their fatigue and osseointegration behaviors
(MDPI, 2022)
Osseointegration capacity and good mechanical behavior are key to the success of the dental implant. In many investigations, comparisons of properties are made using different dental implant designs and ...
Do titanium mini-implants have the same quality of finishing and degree of contamination before and after different manipulations? An in vitro study
(MDPI, 2021)
Evaluate the quality of finishing and degree of contamination before and after handling and surface treatment of titanium (Ti) orthodontic mini-implants (OMIs). A scanning electron microscope (SEM) study ...
Determination of fluid leakages in the different screw-retained implant-abutment connections in a mechanical artificial mouth
(Springer, 2015-07-15)
This study shows the potential risk of microfiltration between two different types of implant-abutment connections screwed at 45 Ncm: external and internal. For the first time the use of a mechanical ...
Fracture and fatigue of titanium narrow dental implants: new trends in order to improve the mechanical response
(MDPI, 2019-11-12)
Sixty-four fractured commercially pure titanium (cp-Ti) narrow dental implants (NDIs) with similar macrogeometry and connection designs were studied after different implantation times in humans in order ...