Browsing Odontologia by Author "Gil Mur, Francisco Javier"
Now showing items 21-40 of 69
-
Do titanium mini-implants have the same quality of finishing and degree of contamination before and after different manipulations? An in vitro study
Zogheib, Tatiana; Walter, André; De la Iglesia, Fernando; Espinar Escalona, Eduardo; Gil Mur, Francisco Javier; Puigdollers, Andreu (Metals, 2021)Evaluate the quality of finishing and degree of contamination before and after handling and surface treatment of titanium (Ti) orthodontic mini-implants (OMIs). A scanning electron microscope (SEM) study ... -
Effect of temperature on the orthodontic clinical applications of NiTi closed-coil springs
Espinar Escalona, Eduardo; Llamas-Carreras, José-María; Barrera Mora, José María; Abalos, Camilo; Gil Mur, Francisco Javier (Medicina Oral, Patologia Oral y Cirugia Bucal, 2013-07-01)NiTi spring coils were used to obtain large deformation under a constant force. The device consists on a NiTi coil spring, superelastic at body temperature, in order to have a stress plateau during the ... -
Effect of the acid-etching on grit-blasted dental implants to improve osseointegration: histomorphometric analysis of the bone-implant contact in the rabbit tibia model
RÍOS-CARRASCO, BLANCA; Ferreira de Lemos, Bernardo; Herrero-Climent, Mariano; Gil Mur, Francisco Javier; Ríos-Santos, José-Vicente (Coatings, 2021)Previous studies have shown that the most reliable way to evaluate the success of an implant is by bone-to-implant contact (BIC). Recent techniques allow modifications to the implant surface that improve ... -
Effect of the nature of the particles released from bone level dental implants: physicochemical and biological characterization
Vara, Juan Carlos; Delgado, Juan; Estrada-Martínez, Alejandro; Pérez-Pevida, Esteban; Brizuela Velasco, Aritza; Bosch Canals, Begoña Maria; Pérez, Román; Gil Mur, Francisco Javier (Coatings, 2022)The placement of bone–level dental implants can lead to the detachment of particles in the surrounding tissues due to friction with the cortical bone. In this study, 60 bone–level dental implants were ... -
Effects of different undersizing site preparations on implant stability
Ferreira de Lemos, Bernardo; Lopez-Jarana, Paula; Falcao-Costa, Carlos; RÍOS-CARRASCO, BLANCA; Gil Mur, Francisco Javier; Ríos-Santos, José-Vicente; Herrero-Climent, Mariano (International Journal of Environmental Research and Public Health, 2020)As immediate loading protocols are becoming more frequent, the primary stability of implants has become an essential criterion for the osseointegration of dental implants. Based on this, the objective ... -
Enhanced osteoconductivity on electrically charged titanium implants treated by physicochemical surface modifications methods
Fernández Yagüe, Marc; Pérez Antoñanzas, Roman; Roa, Joan Josep; Biggs, Manus; Gil Mur, Francisco Javier; PEGUEROLES, MARTA (Nanomedicine: Nanotechnology, Biology and Medicine, 2019-06)Biomimetic design is a key tenet of orthopedic device technology, and in particular the development of responsive surfaces that promote ion exchange with interfacing tissues, facilitating the ionic ... -
Evaluation of bone loss in antibacterial coated dental implants: an experimental study in dogs
Godoy-Gallardo, Maria; Manzanares Céspedes, Maria Cristina; Sevilla Sánchez, Pablo; Nart, Jose; Manzanares, Norberto; Manero, José María; Gil Mur, Francisco Javier; Boyd, Steven; Rodríguez Rius, Daniel (Materials science and engineering C. Biomimetic and supramolecular systems, 2016)The aim of this study was to evaluate the in vivo effect of antibacterial modified dental implants in the first stages of peri-implantitis. Thirty dental implants were inserted in the mandibular premolar ... -
Evaluation of the inflammatory and osteogenic response induced by titanium particles released during implantoplasty of dental implants
Toledano-Serrabona, Jorge; Bosch Canals, Begoña Maria; Díez-Tercero, Leire; Gil Mur, Francisco Javier; Camps Font, Octavi; Valmaseda-Castellon, Eduard; Gay Escoda, Cosme; Sánchez-Garcés, Mª Ángeles (Scientific Reports, 2022)Implantoplasty is a mechanical decontamination technique that consists of removing the threads and polishing and smoothing the dental implant surface. During implantoplasty there is a large release of ... -
Evaluation of titanium dental implants after early failure of osseointegration by means of X-ray photoelectron spectoscopy, electron microscopy and histological studies
Lázaro, Pedro; Herrero-Climent, Mariano; Gil Mur, Francisco Javier (Journal of Biomedical Science and Engineering, 2010-11)In this work, we analysed 56 clinically failed and retrieved implants by means of scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS) and histological studies. The surface ... -
Fabrication and deposition of copper and copper oxide nanoparticles by laser ablation in open air
Fernández Arias, Mónica; Boutinguiza Larosi, Mohamed; Del Val García, Jesús; Riveiro, Antonio; Rodríguez, Daniel; Arias-González, Felipe; Gil Mur, Francisco Javier; Pou, Juan (Nanomaterials, 2020-02-10)The proximity of the “post-antibiotic era”, where infections and minor injuries could be a cause of death, there are urges to seek an alternative for the cure of infectious diseases. Copper nanoparticles ... -
Fatigue of narrow dental implants: influence of the hardening method
Pérez Antoñanzas, Roman; Gargallo-Albiol, Jordi; Altuna, Pablo; Herrero-Climent, Mariano; Gil Mur, Francisco Javier (Materials, 2020)The use of narrow titanium dental implants (NDI) for small ridges, reduced interdental space, or missing lateral incisors can be a viable option when compared to the conventional wider dental implants. ... -
Fracture and fatigue of titanium narrow dental implants: new trends in order to improve the mechanical response
Velasco-Ortega, Eugenio; Flichy-Fernández, Antonio; Punset fuste, Miquel; Jiménez-Guerra, Alvaro; Manero, José María; Gil Mur, Francisco Javier (Materials, 2019-11-12)Sixty-four fractured commercially pure titanium (cp-Ti) narrow dental implants (NDIs) with similar macrogeometry and connection designs were studied after different implantation times in humans in order ... -
Functionalization of CoCr surfaces with cell adhesive peptides to promote HUVECs adhesion and proliferation
Castellanos, Maria Isabel; Mas-Moruno, Carlos; Grau, Anna; Serra-Picamal, Xavier; Trepat, Xavier; Albericio Palomera, Fernando; Joner, Michael; Gil Mur, Francisco Javier; Ginebra, Maria-Pau; Manero, José María; PEGUEROLES, MARTA (Applied Surface Science, 2017)Biomimetic surface modification with peptides that have specific cell-binding moieties is a promising approach to improve endothelialization of metal-based stents. In this study, we functionalized CoCr ... -
Impedimetric antimicrobial peptide-based sensor for the early detection of periodontopathogenic bacteria
RODRIGUEZ-CONTRERAS, ALEJANDRA; Marqués-Calvo, María Soledad; Gil Mur, Francisco Javier; Manero, José María; Hoyos-Nogués, Mireia; BROSEL, SERGI; Abramova, Natalia; Muñoz, Francesc-Xavier; Bratov, Andrey; Mas-Moruno, Carlos (Journal of Materials Science: Materials in Medicine, 2016)Novel researches are focused on the prevention and management of post-operative infections. To avoid this common complication of implant surgery, it is preferable to use new biomaterials with antibacterial ... -
In vitro corrosion behavior of lingual orthodontic archwires
Suarez, Carlos; Vilar, Teresa; Sevilla Sánchez, Pablo; Gil Mur, Francisco Javier (International Journal of Corrosion, 2011)To investigate the in vitro electrochemical corrosive behavior of archwires used in lingual orthodontics and the effects on the phase transition temperatures. Materials and Methods. Six different types ... -
In vitro study of preload loss in different implant abutment connection designs
Vinhas, Ana Sofia de Abreu Fernandes; Aroso, Carlos; salazar, filomena; Relvas Santos, Marta; Braga, Ana Cristina; RÍOS-CARRASCO, BLANCA; Gil Mur, Francisco Javier; Rios-Santos, José Vicente; Fernández-Palacín, Ana; Herrero-Climent, Mariano (Materials, 2022)The stability and integrity of the abutment-implant connection, by means of a screw, is fallible from the moment the prosthetic elements are joined and is dependent on the applied preload, wear of the ... -
In vitro study of shear bond strength in direct and indirect bonding with three types of adhesive systems
Iglesias, Angelica; Flores, Teresa; Moyano Lleixà, Javier; Artés Ribas, Montserrat; Gil Mur, Francisco Javier; Puigdollers, Andreu (Materials, 2020)This study aimed to compare the shear bond strength (SBS) and adhesive remaining index (ARI) using one conventional and two novel adhesive systems with clinical step reduction and direct and indirect ... -
"In vitro" study about variables that influence in arch friction with conventional and self-ligating brackets
Moyano Lleixà, Javier; Mases, Laia; Izeta, Telmo; Flores, Teresa; Fernandez-Bozal, Javier; Gil Mur, Francisco Javier; Puigdollers, Andreu (Materials, 2019-10-09)Many advantages have been described surrounding self-ligating (SL) brackets compared to metallic conventional ligating (CL) brackets, such as: Less total treatment time, alignment efficiency, patient ... -
In-situ laser directed energy deposition of biomedical Ti-Nb and Ti-Zr-Nb alloys from elemental powders
Arias-González, Felipe; Rodríguez-Contreras, Alejandra; Punset fuste, Miquel; Manero, José María; Barro, Oscar; Fernández Arias, Mónica; Lusquiños Rodríguez, Fernando; Gil Mur, Francisco Javier; Pou, Juan (Metals, 2021)In order to achieve the required properties of titanium implants, more resources and research are needed to turn into reality the dream of developing the perfect implant material. The objective of this ... -
Influence of bone-level dental implants placement and of cortical thickness on osseointegration: in silico and In vivo analyses
Gil Mur, Francisco Javier; Sandino, Clara; Cerrolaza, Miguel; Pérez, Román; Herrero-Climent, Mariano; RÍOS-CARRASCO, BLANCA; Rios-Santos, Jose Vicente; Brizuela Velasco, Aritza (Journal of Clinical Medicine, 2022)The purpose of this research is to study the biomechanical response of dental implants in bone-level type locations, 0.5 mm above and below the bone level. In addition, the influence of the thickness ...