A systematic study of restorative crown-materials combinations for dental implants: characterization of mechanical properties under dynamic loads
Autor/a
Ferrer, Miquel
Cantó, Oriol
Cabratosa-Termes, Josep
Data de publicació
2022ISSN
1422-0067
Resum
This study aimed to find the optimum mechanical characteristics of the restorative materials for the manufacture of implant crowns subjected to impact loading when different combinations of materials are used for the inner and outer crown. Several combinations of external–internal crown restorative materials were analyzed. The dynamic stresses at eight different zones of a dental implant subjected to an impact load and the influence of several mechanical properties, such as the Young’s modulus, Poisson’s ratio, density, and initial velocity, were analyzed and compared. A detailed 3D model was created, including the crown, the retention screw, the implant, and a mandible section. The model was then built by importing the 3D geometries from CAD software. The whole 3D model was carefully created in order to guarantee a finite element mesh that produced results adjusted to physical reality. Then, we conducted a numerical simulation using the finite element method (FEM). The results of the FEM analysis allowed for evaluating the effect that different combinations of restorative materials and mechanical properties had on the stress distribution in various regions of the implant. The choice of restorative material is a factor to be considered in order to preserve the integrity of osseointegration. Restorative materials transfer more or less stress to the dental implant and surrounding bone, depending on their stiffness. Therefore, an inadequate Young’s modulus of the rehabilitation material can affect the survival of the implant over time. Eight interactive graphics were provided on a web-based surface platform to help clinical dentists, researchers, and manufacturers to select the best restorative materials combination for the crown.
Tipus de document
Article
Versió del document
Versió publicada
Llengua
English
Matèries (CDU)
616.3 - Patologia de l'aparell digestiu. Odontologia
Paraules clau
Implants dentals
Forces dinàmiques
Comportament biomecànic
Materials de restauració
Materials de la corona
Implantes dentales
Fuerzas dinámicas
Comportamiento biomecánico
Materiales de restauración
Materiales de la corona
Dental implants
Dynamical forces
Biomechanical behavior
Restorative materials
Crown materials
Pàgines
16
Publicat per
MDPI
Col·lecció
23; 15
Publicat a
International Journal of Molecular Sciences
Citació
Marimon Serra, Xavier; Cerrolaza, Miguel; Ferrer, Miquel [et al.]. A systematic study of restorative crown-materials combinations for dental implants: characterization of mechanical properties under dynamic loads. International Journal of Molecular Sciences, 2022, 23(15), 8769. Disponible en: <https://www.mdpi.com/1422-0067/23/15/8769>. Fecha de acceso: 5 oct. 2022. DOI: 10.3390/ijms23158769
Enllaç al document relacionat
Aquest element apareix en la col·lecció o col·leccions següent(s)
- Odontologia [245]
Drets
This is an open access article distributed under the Creative Commons Attribution License which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Excepte que s'indiqui una altra cosa, la llicència de l'ítem es descriu com https://creativecommons.org/licenses/by/4.0/