Visualitzant Odontologia per autor/a "Herrero-Climent, Mariano"
Ara mostrant els elements 1-20 de 25
-
A radiographic and clinical comparison of immediate vs. early loading (4 weeks) of implants with a new thermo-chemically treated surface: a randomized clinical trial
Albertini, Matteo; Herrero-Climent, Federico; Díaz-Castro, Carmen María; Nart Molina, José; Fernández-Palacín, Ana; Ríos-Santos, José-Vicente; Herrero-Climent, Mariano (International Journal of Environmental Research and Public Health, 2021)Background: Implant dentistry has evolved over time, resulting in better treatment outcomes for both patients and clinicians. The aim of this trial was to test whether the immediate loading of implants ... -
Accuracy of implant casts generated with conventional and digital impressions: an In vitro study
Ribeiro, Paulo; Herrero-Climent, Mariano; Díaz-Castro, Carmen María; Ríos-Santos, José-Vicente; Padrós, Roberto; Gil Mur, Francisco Javier; Falcao-Costa, Carlos (International Journal of Environmental Research and Public Health, 2018)Purpose: The aim of this study was to compare the accuracy of digital dental impressions with the accuracy of impressions obtained via conventional techniques. Methods: Two different master models were ... -
Advances in surfaces and osseointegration in implantology. Biomimetic surfaces
Albertini, Matteo; Fernandez-Yague, Marc; Lázaro, Pedro; Herrero-Climent, Mariano; Rios Santos, José Vicente; Bullon, Pedro ; Gil Mur, Francisco Javier (Medicina Oral, Patología Oral y Cirugía Bucal, 2015)The present work is a revision of the processes occurring in osseointegration of titanium dental implants according to different types of surfaces -namely, polished surfaces, rough surfaces obtained ... -
Benefits of residual aluminum oxide for sand blasting titanium dental implants: osseointegration and bactericidal effects
Gil Mur, Francisco Javier; Pérez Antoñanzas, Román; Herrero-Climent, Mariano; Rizo-Gorrita, María; Torres-Lagares, Daniel; Gutierrez, Jose Luis (Materials, 2022)Objectives. The purpose of this work was to determine the influence of residual alumina after sand blasting treatment in titanium dental implants. This paper studied the effect of alumina on physico-chemical ... -
Corrosion behavior of titanium dental implants with implantoplasty
Lozano, Pablo; Peña, Marta; Herrero-Climent, Mariano; Rios-Santos, Jose Vicente; RÍOS-CARRASCO, BLANCA; Brizuela Velasco, Aritza; Gil Mur, Francisco Javier (Materials, 2022)The procedure generally used to remove bacterial biofilm adhering to the surface of titanium on dental implants is implantoplasty. This treatment is based on the machining of the titanium surface to ... -
Corrosion resistance and ion release of dental prosthesis of CoCr obtained by CAD-CAM milling, casting and laser sintering
Padrós, Roberto; Giner-Tarrida, Luis; Herrero-Climent, Mariano; Punset fuste, Miquel; Gil Mur, Francisco Javier (Metals, 2020)Corrosion resistance and ion release behavior have been evaluated for thirty dental restoration samples obtained by three different manufacturing systems: computer-aided design and manufacturing (CAD-CAM), ... -
Differences between the fittings of dental prostheses produced by CAD-CAM and laser sintering processes
Herrero Climent, Mariano; Punset fuste, Miquel; Molmeneu, Meritxell; Brizuela, Aritza; Gil, FJ (Journal of Functional Biomaterials, 2023)Digital dentistry and new techniques for the dental protheses’ suprastructure fabrication have undergone a great evolution in recent years, revolutionizing the quality of dental prostheses. The aim of ... -
Effect of the acid-etching on grit-blasted dental implants to improve osseointegration: histomorphometric analysis of the bone-implant contact in the rabbit tibia model
RÍOS-CARRASCO, BLANCA; Ferreira de Lemos, Bernardo; Herrero-Climent, Mariano; Gil Mur, Francisco Javier; Ríos-Santos, José-Vicente (Coatings, 2021)Previous studies have shown that the most reliable way to evaluate the success of an implant is by bone-to-implant contact (BIC). Recent techniques allow modifications to the implant surface that improve ... -
Effects of different undersizing site preparations on implant stability
Ferreira de Lemos, Bernardo; Lopez-Jarana, Paula; Falcao-Costa, Carlos; RÍOS-CARRASCO, BLANCA; Gil Mur, Francisco Javier; Ríos-Santos, José-Vicente; Herrero-Climent, Mariano (International Journal of Environmental Research and Public Health, 2020)As immediate loading protocols are becoming more frequent, the primary stability of implants has become an essential criterion for the osseointegration of dental implants. Based on this, the objective ... -
Evaluation of titanium dental implants after early failure of osseointegration by means of X-ray photoelectron spectoscopy, electron microscopy and histological studies
Lázaro, Pedro; Herrero-Climent, Mariano; Gil Mur, Francisco Javier (Journal of Biomedical Science and Engineering, 2010-11)In this work, we analysed 56 clinically failed and retrieved implants by means of scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS) and histological studies. The surface ... -
Fatigue of narrow dental implants: influence of the hardening method
Pérez Antoñanzas, Roman; Gargallo-Albiol, Jordi; Altuna, Pablo; Herrero-Climent, Mariano; Gil Mur, Francisco Javier (Materials, 2020)The use of narrow titanium dental implants (NDI) for small ridges, reduced interdental space, or missing lateral incisors can be a viable option when compared to the conventional wider dental implants. ... -
In vitro study of preload loss in different implant abutment connection designs
Vinhas, Ana Sofia de Abreu Fernandes; Aroso, Carlos; salazar, filomena; Relvas Santos, Marta; Braga, Ana Cristina; RÍOS-CARRASCO, BLANCA; Gil Mur, Francisco Javier; Rios-Santos, José Vicente; Fernández-Palacín, Ana; Herrero-Climent, Mariano (Materials, 2022)The stability and integrity of the abutment-implant connection, by means of a screw, is fallible from the moment the prosthetic elements are joined and is dependent on the applied preload, wear of the ... -
Incidence of peri-implantitis and relationship with different conditions: a retrospective study
Astolfi, Victor; RÍOS-CARRASCO, BLANCA; Gil, FJ; Ríos-Santos, JV; Bullón, Beatriz; Herrero-Climent, Mariano; Bullon, Pedro (International Journal of Environmental Reseacrh and Public Health, 2022)Articles on the prevalence of peri-implant diseases showed that 90% of peri-implant tissues had some form of inflammatory response and a prevalence of peri-implantitis from 28% to 51% according to various ... -
Influence of bone-level dental implants placement and of cortical thickness on osseointegration: in silico and In vivo analyses
Gil Mur, Francisco Javier; Sandino, Clara; Cerrolaza, Miguel; Pérez, Román; Herrero-Climent, Mariano; RÍOS-CARRASCO, BLANCA; Rios-Santos, Jose Vicente; Brizuela Velasco, Aritza (Journal of Clinical Medicine, 2022)The purpose of this research is to study the biomechanical response of dental implants in bone-level type locations, 0.5 mm above and below the bone level. In addition, the influence of the thickness ... -
Influence of implant design and under-preparation of the implant site on implant primary stability: an In vitro study
Herrero-Climent, Mariano; Ferreira de Lemos, Bernardo; Herrero-Climent, Federico; Falcao-Costa, Carlos; Oliveira, Hélder Line; Herrera, Manuela; Gil Mur, Francisco Javier; RÍOS-CARRASCO, BLANCA; Ríos-Santos, José-Vicente (International Journal of Environmental Research and Public Health, 2020)The aim of this study was to evaluate the effects of different implant sites an under-preparation sequence associated with two different implant designs on implant primary stability measured by two ... -
Influence of the CAD-CAM systems on the marginal accuracy and mechanical properties of dental restorations
Padrós, Roberto; Giner-Tarrida, Luis; Herrero-Climent, Mariano; Falcao-Costa, Carlos; Ríos-Santos, José-Vicente; Gil Mur, Francisco Javier (International Journal of Environmental Research and Public Health, 2020)The aim of this study was to compare the quality of different computer-assisted-design and computer assisted manufacturing systems (CAD-CAM) generated by only one scanner, focusing on vertical fit ... -
Influence of the elastic modulus on the osseointegration of dental implants
Brizuela Velasco, Aritza; Herrero-Climent, Mariano; Rios Carrasco, Elisa; Rios Santos, José Vicente; Pérez Antoñanzas, Roman; Manero, José María; Gil Mur, Francisco Javier (Materials, 2019-03-25)The load transfer from metallic prosthesis to tissue plays an important role in the success of a designed device. From a mechanical behavior point of view, the load transfer will be favored when the ... -
Influence of titanium surface residual stresses on osteoblastic response and bacteria colonization
Pereira, Rita; Maia, Paulo; Ríos-Santos, JV; Herrero-Climent, Mariano; Ríos Carrasco, Blanca; Aparicio, Conrado; Gil, FJ (Materials, 2024)Grit basting is the most common process applied to titanium dental implants to give them a roughness that favors bone colonization. There are numerous studies on the influence of roughness on osseointegration, ... -
Mechanical characterization of dental prostheses manufactured with PMMA–graphene composites
Punset fuste, Miquel; Brizuela Velasco, Aritza; Pérez-Pevida, Esteban; Herrero-Climent, Mariano; Manero, José María; Gil, FJ (Materials, 2022)The use of a PMMA composite with graphene is being commercialized for application as dental prostheses. The different proportions of fibers provide a wide range of colors that favors dental esthetics ... -
Mechanical properties of CoCr dental-prosthesis restorations made by three manufacturing processes: influence of the microstructure and topography
Padrós, Roberto; Punset fuste, Miquel; Molmeneu, Meritxell; Brizuela Velasco, Aritza; Herrero-Climent, Mariano; Rupérez de Gracia, Elisa; Gil Mur, Francisco Javier (Metals, 2020)The aim of this study is to compare the mechanical properties of three different dental restorations’ manufacturing processes (CADCAM milling, casting and laser sintering) generated by only one laboratory ...