In vitro comparison of internal and marginal adaptation between printed and milled onlays
Autor/a
Cantó-Navés, Oriol
Michels, Kyra
Figueras-Alvarez, Oscar
Fernández-Villar, Sandra
Cabratosa-Termes, Josep
Roig, Miguel
Data de publicació
2023ISSN
1996-1944
Resum
Statement of problem: Nowadays, milling is still the gold standard for fabricating indirect restorations, but to overcome its disadvantages, there are alternatives, such as 3D printing. Purpose: This study aimed to compare the gaps between the prepared tooth and milled and printed onlays fabricated with the same CAD design. It also aimed to determine the gap reproducibility across onlays fabricated by 3D printing and milling. Methods: A resin tooth was prepared for an onlay. After scanning the preparation, an onlay was designed with proprietary dental software. Next, 22 onlays were milled in a graphene-reinforced PMMA disc (Group 1), and 22 onlays were 3D-printed with a hybrid composite material (Group 2). After that, all fabricated restorations were scanned and superimposed on the scanned prepared resin tooth. Subsequently, a specific software was used to measure the margin, central, and intaglio-located gap between the milled or printed restoration and the preparation. Finally, measurements were compared with a multifactor analysis of variance. Results: The results demonstrated that printed onlays (Group 2) adapted better to the prepared tooth than the milled ones (Group 1) (p < 0.05). The comparison of standard deviations showed the better gap reproducibility of printed onlays (p < 0.05). Conclusion: This study concluded that the printed onlays adapted significantly better to the prepared tooth than the milled onlays. Printed onlays also showed significantly better gap reproducibility.
Tipus de document
Article
Versió del document
Versió publicada
Llengua
Anglès
Matèries (CDU)
616.3 - Patologia de l'aparell digestiu. Odontologia
Paraules clau
Onlays impresos en 3D
Onlays fresats
Restauració indirecta
Resina
Grafè
Superposiciones impresas en 3D
Incrustaciones fresadas
Restauración indirecta
Resina
Grafeno
3D-printed onlays
Milled onlays
Indirect restoration
Resin
Graphene
Pàgines
12
Publicat per
MDPI
Col·lecció
16
Publicat a
Materials
Citació
Cantó-Navés, Oriol; Michels, Kyra; Figueras-Alvarez, Oscar [et al.]. In vitro comparison of internal and marginal adaptation between printed and milled onlays. Materials, 2023, 16(21), 6962. Disponible en : <https://www.mdpi.com/1996-1944/16/21/6962>. Fecha de acceso: 14 dic. 2023. DOI: 10.3390/ma16216962
Aquest element apareix en la col·lecció o col·leccions següent(s)
- Odontologia [228]
Drets
© 2023 by the authors. Licensee MDPI, Basel, Switzerland. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution (CC BY) license (https://creativecommons.org/licenses/by/4.0/).
Excepte que s'indiqui una altra cosa, la llicència de l'ítem es descriu com https://creativecommons.org/licenses/by/4.0/