Bone stress evaluation with and without cortical bone using several dental restorative materials subjected to impact load: a fully 3D transient finite-element study
Autor/a
Medina-Galvez, Raul
Cantó, Oriol
Ferrer, Miquel
Cabratosa-Termes, Josep
Fecha de publicación
2021DOI
10.3390/ma14195801
ISSN
1996-1944
Resumen
Statement of problem. Previous peri-implantitis, peri-implant bone regeneration, or immediate implant placement postextraction may be responsible for the absence of cortical bone. Single crown materials are then relevant when dynamic forces are transferred into bone tissue and, therefore, the presence (or absence) of cortical bone can affect the long-term survival of the implant. Purpose: the purpose of this study is to assess the biomechanical response of dental rehabilitation when selecting different crown materials in models with and without cortical bone. Methods: several crown materials were considered for modeling six types of crown rehabilitation: full metal (MET), metal-ceramic (MCER), metal-composite (MCOM), peek-composite (PKCOM), carbon fiber-composite (FCOM), and carbon fiber-ceramic (FCCER). An impact-load dynamic finite-element analysis was carried out on all the 3D models of crowns mentioned above to assess their mechanical behavior against dynamic excitation. Implant-crown rehabilitation models with and without cortical bone were analyzed to compare how the load-impact actions affect both type of models. Results: numerical simulation results showed important differences in bone tissue stresses. The results show that flexible restorative materials reduce the stress on the bone and would be especially recommendable in the absence of cortical bone. Conclusions: this study demonstrated that more stress is transferred to the bone when stiffer materials (metal and/or ceramic) are used in implant supported rehabilitations; conversely, more flexible materials transfer less stress to the implant connection. Also, in implant-supported rehabilitations, more stress is transferred to the bone by dynamic forces when cortical bone is absent.
Tipo de documento
Artículo
Versión del documento
Versión publicada
Lengua
Inglés
Materias (CDU)
616.3 - Patología del aparato digestivo. Odontología
Palabras clave
Prova d’impacte
Anàlisi transitòria
Forces dinàmiques
FEM
FEA
Comportament biomecànic
Rehabilitació d'implants
Materials de rehabilitació
Materials de la corona
Pèrdua òssia
Prueba de impacto
Análisis transitoria
Fuerzas dinámicas
FEM
FEA
Comportamiento biomecánico
Rehabilitación de implantes
Materiales de rehabilitación
Materiales de la corona
Pérdida ósea
Impact test
Transient analysis
Dynamic forces
FEM
FEA
Biomechanical behavior
Implant rehabilitation
Rehabilitation materials
Crown materials
Bone loss
Páginas
16
Publicado por
MDPI
Colección
14;19
Publicado en
Materials
Citación
Medina-Galvez, Raul; Cantó-Navés, Oriol; Marimon, Xavier [et al.]. Bone stress evaluation with and without cortical bone using several dental restorative materials subjected to impact load: a fully 3D transient finite-element study. Materials, 2021, 14(19), 5801. Disponible en: <https://www.mdpi.com/1996-1944/14/19/5801>. Fecha de acceso: 21 oct. 2021. DOI: 10.3390/ma14195801
Este ítem aparece en la(s) siguiente(s) colección(ones)
- Odontologia [228]
Derechos
This is an open access article distributed under the Creative Commons Attribution License which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited
Excepto si se señala otra cosa, la licencia del ítem se describe como https://creativecommons.org/licenses/by/4.0/