In vitro corrosion behavior of lingual orthodontic archwires
Autor/a
Suarez, Carlos
Vilar, Teresa
Sevilla Sánchez, Pablo
Gil Mur, Francisco Javier
Fecha de publicación
2011ISSN
1687-9325
Resumen
To investigate the in vitro electrochemical corrosive behavior of archwires used in lingual orthodontics and the effects on the phase transition temperatures. Materials and Methods. Six different types of archwires of stainless steel, titanium-molybdenum, nickel-titanium and nickel-titanium-copper were used. Corrosion tests were performed following ISO-standard 10993-15:2000. Differential scanning calorimetry and scanning electron microscopy were used. Results. The stainless steel archwires showed an Epit around −600mV, and those of titanium alloys showed Epit values around 1000mV. Differential scanning calorimetry detected a rhombohedral phase in nickel-titanium archwires, while it was not detected in nickel-titanium-copper wires. A difference of 2◦C to 3.5◦C from the manufacturer’s claim was found in the as-received and polarized samples, respectively. Conclusions. The 0.016 stainless steel archwires were found to be the less resistant to corrosion. A rhombohedral phase was detected on the nickel-titanium archwires. No major differences were observed among groups concerning phase transformation temperatures.
Tipo de documento
Artículo
Versión del documento
Versión publicada
Lengua
Inglés
Materias (CDU)
616.3 - Patología del aparato digestivo. Odontología
Palabras clave
Materials -- Biodegradació
Ortodòncia
Comportament a la corrosió
Ortodòncia lingual
Materials -- Corrosió
Materiales - Biodegradación
Ortodoncia
Comportamiento en la corrosión
Ortodoncia lingual
Materiales - Corrosión
Materials -- Biodegradation
Orthodontics
Corrosion behavior
Lingual orthodontics
Materials -- Corrosion
Páginas
10
Publicado por
Hindawi Publishing Corporation
Colección
2011;
Publicado en
International Journal of Corrosion
Citación
Suarez, Carlos; Vilar, Teresa; Sevilla, Pablo [et al.]. In vitro corrosion behavior of lingual orthodontic archwires. International Journal of Corrosion, 2011, 2011, p. 1-9. Disponible en: <https://www.hindawi.com/journals/ijc/2011/482485/>. Fecha de acceso: 11 nov. 2021. DOI: 10.1155/2011/482485
Este ítem aparece en la(s) siguiente(s) colección(ones)
- Odontologia [228]
Derechos
© 2011 Carlos Suarez et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Excepto si se señala otra cosa, la licencia del ítem se describe como https://creativecommons.org/licenses/by/3.0/