Influence of the elastic modulus on the osseointegration of dental implants
Autor/a
Rios Carrasco, Elisa
Rios Santos, José Vicente
Pérez Antoñanzas, Roman
Manero, José María
Gil Mur, Francisco Javier
Fecha de publicación
2019-03-25ISSN
1996-1944
Resumen
The load transfer from metallic prosthesis to tissue plays an important role in the success
of a designed device. From a mechanical behavior point of view, the load transfer will be favored
when the elastic modulus between the metallic implant and the bone tissue are similar. Titanium
and Ti-6Al-4V are the most commonly used metals and alloys in the field of dental implants,
although they present high elastic moduli and hence trigger bone resorption. We propose the
use of low-modulus -type titanium alloys that can improve the growth of new bone surrounding the
implant. We designed dental implants with identical morphology and micro-roughness composed
of: Ti-15Zr, Ti-19.1Nb-8.8Zr, Ti-41.2Nb-6.1Zr, and Ti-25Hf-25Ta. The commercially pure Ti cp and
Ti-6Al-4V were used as control samples. The alloys were initially mechanically characterized with a
tensile test using a universal testing machine. The results showed the lowest elastic modulus for the
Ti-25Hf-25Ta alloy. We implanted a total of six implants in the mandible (3) and maxilla (3) for each
titanium alloy in six minipigs and evaluated their bone index contact (i.e., the percentage of new bone
in contact with the metal—BIC%) after 3 and 6 weeks of implantation. The results showed higher
BIC% for the dental implants with lowest elastic modulus, showing the importance of decreasing the
elastic modulus of alloys for the successful osseointegration of dental implants.
Tipo de documento
Artículo
Versión del documento
Versión aceptada
Lengua
Inglés
Materias (CDU)
616.3 - Patología del aparato digestivo. Odontología
Palabras clave
Implants dentals
Implant dentures
Implantes dentales
Titani--Aliatges
Titanium alloys
Titanio--Aleaciones
Páginas
7
Publicado por
MDPI
Colección
12;6
Publicado en
Materials
Citación
Brizuela, Aritza; Herrero Climent, Mariano; Rios Carrasco, Elisa; Rios Santos, José Vicente; Pérez Antoñanzas, Roman; Manero, José María; Gil Mur, Francesc Xavier. Influence of the elastic modulus on the osseointegration of dental implants. Materials, 2019, vol. 12, núm. 6. Disponible en: <https://www.mdpi.com/1996-1944/12/6/980>. Fecha de acceso: 14 jun. 2019. https://doi.org/10.3390/ma12060980
Número del acuerdo de la subvención
info:eu-repo/grantAgreement/MINECO/MAT2015-67183-R
Este ítem aparece en la(s) siguiente(s) colección(ones)
- Odontologia [228]
Derechos
http://creativecommons.org/licenses/by-nc-nd/4.0/
El ítem tiene asociados los siguientes ficheros de licencia:
Excepto si se señala otra cosa, la licencia del ítem se describe como http://creativecommons.org/licenses/by-nc-nd/4.0/